Water Damage Restoration Cost in Garland, TX (2026 Guide)
Approximate 2026 prices for extraction, drying, repairs, mold, and sewage cleanup in Garland, with the factors that move the bill.

Most water damage restoration jobs in Garland, TX cost about $1,000 to $5,000. Extraction alone is about $500 to $1,500, a 3 to 5 day dry-out about $1,000 to $3,500, and sewage or mold work can push a job past $10,000. Water category, square footage, and time before drying starts change the price most.
These are approximate 2026 ranges for Garland and nearby Dallas County. Every job is priced after an inspection, and insurance often pays a large share of a sudden loss. Use this guide to know what is normal before you call.
Typical water damage prices in Garland
| Service | Approx. cost |
|---|---|
| Water extraction only | $500 – $1,500 |
| Structural drying (3–5 days of equipment) | $1,000 – $3,500 |
| Burst pipe dry-out + drywall repair | $1,500 – $5,000 |
| Slab leak water damage | $2,000 – $6,000 |
| Mold remediation, one area | $1,500 – $4,000 |
| Sewage backup cleanup | $3,000 – $10,000+ |
The final bill is usually two parts: mitigation (extraction and drying) and repairs (drywall, paint, flooring). Insurance adjusters often look at each part separately.
What drives the cost up or down?
Six things set the price of a Garland water damage job: how many square feet got wet, how dirty the water was, how long it sat, what materials must come out, how many days the equipment runs, and how much rebuild work follows.
1. Square footage
A leak that wet 100 square feet of carpet is a small job. Water that ran under a wall into three bedrooms and a hall is several times bigger. Crews price extraction and drying largely by the area affected.
2. Water category
Clean water from a supply line (Category 1) is the cheapest to handle. Gray water from a washer or dishwasher (Category 2) needs more cleaning. Sewage or flood water (Category 3) means protective gear, removal of all porous materials, and disinfection, which can double the cost.
3. Time before drying starts
Water caught in the first few hours can often be dried in place. After a day or two, carpet pad, drywall, and cabinets absorb more water and are more likely to be replaced. Fast calls save money.
4. Materials
Tile on a concrete slab is easy. Site-finished oak, plaster walls, and particleboard cabinets are hard and costly. Class 4 drying of dense materials takes special equipment and more days.
5. Equipment days
Most Garland jobs need 3 to 5 days of air movers and dehumidifiers. Each machine is billed per day, so a larger loss or a humid summer week adds cost.
6. Rebuild
Drywall, texture, paint, baseboards, and flooring are often the biggest line items. A kitchen with cabinet replacement can cost more than the whole dry-out.
Garland examples
Washing machine hose split upstairs. Water soaked the laundry room, ran into a bedroom, and came through the ceiling below. Expect $3,000 to $6,000 for mitigation and ceiling and drywall repairs.
Water heater failed in a garage. Water spread across the slab and wet the lower drywall of the garage and the hall closet behind it. Expect about $800 to $2,500.
Attic AC pan overflow in July. A wet ceiling and insulation in one bedroom, caught within a day. Expect about $1,500 to $3,500, including ceiling repair.
Sewer backup into a hall bath and bedroom. Carpet, pad, and lower drywall removed and disinfected. Expect $4,000 to $8,000.

How insurance changes what you pay
If your loss is sudden and accidental, like a burst pipe, your Texas homeowners policy will usually pay for mitigation and repairs minus your deductible. Many Garland homeowners have deductibles of 1% or 2% of the home's value, so check yours before the work starts.
Slow leaks, rising flood water, and sewer backups without an endorsement are common exclusions. Our Texas homeowners insurance water damage guide walks through each one.
How to keep the cost down
- Shut off the water fast and call right away.
- Move furniture and rugs off wet floors.
- Take photos before anything is removed.
- Do not close up walls before readings say dry.
- Ask for a written scope and daily moisture logs.
- Choose a provider who can do both the water damage repair in Garland and the dry-out, so nothing falls between two companies.
When to call
If water reached carpet pad, drywall, or cabinets, call for an inspection. The provider measures moisture, explains the scope, and gives you a price before work starts. For an active leak, go straight to emergency water damage mitigation in Garland.
Need help with this now? See water damage repair in Garland, or read texas homeowners insurance water damage guide.



